Locate two connecting bars (C);
• Connect them using three side rails (A);
• Push rails (A) in completely until secure;
• Ensure all three rails (A) are parallel and evenly spaced

Insert each post (B) into the upper holes of the connecting
bars (C) at each corner;
• Push posts (B) in firmly until they are fully seated;
• Make sure all posts (B) are upright and securely inserted

For each of the following tiers (2nd through 5th):
• Add new connecting bars (C) at the top of
vertical posts (B);
• Install 3 side rails (A) between connecting bars (C);
• Add next set of vertical posts (B);
• Ensure everything is level and secure;
• Repeat until all five tiers are assembled.

• Place one wire shelf (D) on each tier's side rails (A);
• Ensure shelves sit flat and stable;
• For each shelf:
- Attach 4 zip ties (E). One at each corner of the side rail (A);
- The zip tie (E) should secure the wire shelf (D) to the side rail (A);
- After connecting the zip tie (E), cut off the excess length.

Before use:
- Check all the connection are tight and secure;
- Structure is level and stable;
- Shelves are properly seated and secured
Installing the cover:
- Place the transparent cover over the entire structure, securing it with the hook and loop straps around the vertical posts;
- Instal cover in moderate temperatures (avoid very hot and very cold conditions);
- Pull the cover gently but firmly over the frame;
- Use the provided fabric straps to secure evenly
- Avoid overstretching ;
Troubleshooting :
- If the cover rips, please use repair tape to seal the hole